9. POWER TAKE OFF (PTO) SYSTEM
Lx410/450/490 Operator's Manual
9. POWER TAKE OFF (PTO) SYSTEM
1. The tractor comes equipped with a hydraulic/
electric Power Take Off (PTO) clutch.
2. ON/OFF the Power Take Off (PTO) switch can be
done any time while the engine is running.
Avoid injury!
●
Before connecting, disconnecting, adjusting,
cleaning or servicing any Power Take Off
(PTO) driven implement:
• always ensure all moving components have
completely stopped rotating
●
Always ensure Power Take Off (PTO) shaft
shield is installed while the Power Take Off
(PTO) is not in use.
●
Before attempting to replace the Power Take
Off (PTO) shaft cap:
• always wait until the shaft has completely
stopped moving
●
Before installing or operating any Power Take
Off (PTO) driven implements:
• always follow Power Take Off (PTO) driven
implement
Operator’s Manual
, safety decals
and instructions
●
Always engage the parking brake securely,
for details, see "6. Lock and Set the Parking
Brake" on page 7-4 and chock all the tires
safely and securely.
●
Avoid approaching or touching any rotating
component.
! WARNING
1. Operate the Power Take Off
(PTO) System
●
Before connecting, disconnecting, adjusting
or cleaning any Power Take Off (PTO) driven
implement:
• push down Power Take Off (PTO) switch to
OFF position
• shut down the engine
• make sure all rotating component have
stopped
●
Avoid approaching rotating drivelines.
●
Entanglement with a rotating driveline can
lead to serious injury or even death.
●
Keep away from rotating driveline.
●
Keep clothing away from rotating driveline.
●
Make sure all shields and guards are in
position and are correctly installed.
●
Do not run the engine at 2750 Revolutions Per
Minute (rpm) for Lx410/450 and 2650
Revolutions Per Minute (rpm) for Lx490 or
more while Power Take Off (PTO) switch is
ON position.
! WARNING
