Lx410/450/490 Operator's Manual
9. When the transmission hydraulic oil level is on the
lower mark:
• Clean the area around the transmission hydraulic
oil filler cap.
• Remove the transmission hydraulic oil filler cap
from the transmission housing.
• Add transmission hydraulic oil to the appropriate
transmission hydraulic oil level.
10.Install and tighten the transmission hydraulic oil
filler cap.
11.Insert the dipstick.
■
Check the Tire Air Pressure
1. Inspect the tires for fissures or any other
damages.
2. Use a tire gauge to check the tire air pressure.
3. Adjust the tires to the standard tire air pressure as
per the illustration below.
(a) Too high
(b) Standard
(c) Too low
The table below shows the maximum allowed tire air
pressure.
Maximum Tire Air Pressure
Avoid injury!
Improperly maintained tires and rim parts can
cause explosive separation of the wheels.
●
Mounting and dismounting of the tires into
and from the rim must be performed by an
authorized person using proper equipment.
●
Avoid inflating the tires above the
recommended tire air pressure.
●
Avoid standing in front of or over a tire
assembly during inflation.
●
Always use a clip-on chuck and extension
hose long enough for the tire to be inflated
from a safe distance.
●
Avoid attempting to weld or apply heat into a
rim and tire assembly.
• welding can structurally weaken or deform
the rim
• heat can cause an increase in tire air
pressure and result in an explosion
IMPORTANT
●
When checking tire air pressure of liquid filled
tires:
• rotate the tire placing the valve stem on top
position
• the preceding practice prevents the liquid from
escaping through the valve stem
●
To prevent tire damage:
• always inflate the tires to less than the
maximum tire air pressure shown on the tire
sidewall
! WARNING
Tire Size
Ply Rating
Tire Air
Pressure
(maximum)
psi (MPa)
Front
8-16 R1
6
28 (0.19)
27-10.5-15 R3
4
30 (0.21)
10-16.5 R4
6
46 (0.32)
Rear
14.9-24 R1
6
20 (0.14)
44 × 18.00-20 R3
4
20 (0.14)
17.5 L-24 R4
6
20 (0.14)
9A
(a)
(b)
(c)
