Engine Stop Button
(1)
0004881
Figure 15
Push and hold the stop button
(Figure 15, (1)) on the instrument panel to
stop the engine. When the stop button is
pushed, the solenoid valve on the fuel
injection pumps stops the fuel supply to the
engine.
Press and hold the engine stop button until
the engine has come to a complete stop.
NOTICE: Releasing the engine stop
button before the engine has stopped
rotating will cause the engine to
continue to run.
Remote Control (Throttle) Handle
The engine is controlled by the remote
control handle located in the cockpit. The
speed control lever on the engine and clutch
lever on the marine drive are connected by
remote control cables. There are various
models of remote control handles available.
When using a model other than shown
below, consult the manufacturer's
documentation for more information.
Morse Remote Control Handle
(Optional)
This is a single-lever remote control handle
connected by a remote cable. It operates the
clutch to NEUTRAL, FORWARD and
REVERSE and controls the engine speed.
MT-3 Top Mount
(1)
(2)
(3)
(4)
(5)
(6)
(7)
0004886
Figure 16
1 – Reverse High Speed
2 – Reverse Low Speed
3 – Reverse
4 – Neutral
5 – Forward
6 – Forward Low Speed
7 – Forward High Speed
PRODUCT OVERVIEW
6LPA Series Operation Manual
23
© 2007 Yanmar Marine International
