21
“user, password ok!”, for example: send SMS “up123456 jonnes 666666”
Note: 123456 is password of tracker, jonnes is the user name for GPRS login, 666666 is
the password for GPRS login.
6.29.3.
Configure IP and port
Send SMS “pspace+IP+space+port”, tracker will reply “adminip
ok” if executed.
For example: send SMS “adminip123456 104.250.138.146 9000”, tracker will reply
“adminip ok” if executed. (123456 is the password of tracker, and 104.250.138.146 is the
ip, 9000 is the port.)
6.29.4.
Switch to GPRS mode
6.29.4.1.
Send SMS command “GPRS+password” to tracker, it will reply “GPRS
ok!”, that means tracker have switched to work in GPRS mode.
6.29.4.2.
TCP/UDP Switch
SMS command: “GPRS+password,0,0” is used to switch to TCP
mode, TCP is the default mode.
SMS command: “GPRS+password,1,1” is used to switch to UDP
mode.
6.29.4.3.
Send SMS command: “SMS+password” to tracker, it will reply “SMS
OK!”, and switch back to SMS mode.
6.30.
Less GPRS traffic
6.30.1.
Tracker will change to less GPRS traffic mode after parking 5 minutes, GPRS disconnect, and
connect again when alarm being triggered or vehicle starts driving.
6.30.2.
Activate this function: Send "less gprs123456 on", tracker will reply "less gprs on ok".
6.30.3.
Deactivate this function: Send "less gprs123456 off", tracker will reply" less gprs off ok".
Note: 123456 is the password of tracker, and replace it with the new if you have changed.
6.31.
Set up monitor center number
6.31.1.
Setup: send command “cepspace+number” to tracker, it
will reply“centernum ok”. After setup monitor center number, the messages of
auto track by sms will be set to this center number, if all alarms need to be
sent to this number too, then this center number must be setup as authorized
number.
6.31.2.
Cancel monitor center number
Send “nocepassword” to tracker, it will reply “no center num ok”.