20
6.26.
Terminal (local) Time Setting
Send SMS command “time+space+zone+pspace+time” to the tracker device, If executed,
It will reply “time OK”
For example: Send SMS “time zone123456 8”, 8 is time zone of china, If your country locates in
the Western Hemisphere, please add a minus before the time zone, for example, send SMS “time
zone123456 -8”.
6.27.
Reset Hardware
Send SMS command “reset+password” to tracker device, it will reply “reset ok”. And the
GSM module and GPS module in the tracker will be reset.
6.28.
Configure parameters by USB
Connect tracker to computer with the USB cable (option), and open
with notepad and operate it according to the examples.
Note: Correct password is necessary every time when you configure the tracker.
6.29.
GPRS configuration
User must send SMS command via cell phone to set up APN, IP and port before starting
tracking by GPRS.
6.29.1.
Configure APN
APN standards for Access Point Name and differs from country to country. For more information
about your local APN, please inquire with your local GPRS network operator.
Send SMS command to tracker “APN+pSpace+your local APN” via a cell phone and if
executed, the tracker will reply “APN OK”.
For example: Send SMS command “APN123456 CMNET”. If executed, the tracker will reply
“APN OK”.
Notes: 123456 refer to password of tracker and CMNET is the APN of Network Operator of
china (China mobile).
6.29.2.
Configure user, password for GPRS login
In most countries, the user name and password involving GPRS login are not
compulsorily necessary, therefore, the entry can be skipped. For those countries requiring
user name and password, please configure as following:
Send SMS “up+pspace+user+space+password”, If executed, tracker will reply