12
command “password” to the tracker to request exact address, track will automatically
switch to tracking by LBS in GPRS mode. Accuracy of LBS depends on the distance to the
nearest GSM Network Cell Tower or Base Station.
Note: This feature can be used normally in most areas according to the signal of GSM network. It
may not be available in some areas.
6.15.
Monitor (Voice Surveillance)
6.15.1.
The command to switch between Track and Monitor are “track” and
“ monitor”. The default mode is track mode.
6.15.2.
Send SMS “password” to the unit, and it will reply “monitor ok!”
and switch to “monitor” mode.
6.15.3.
Send SMS “password” to the unit, it will reply “tracker ok!” and
restore to “track” mode.
6.16.
Data logging
6.16.1.
Auto logging
：
When the tracker device lost GSM signals or fall offline
from GPRS, tracker will log the tracking position and alerts automatically in
the SD card on the basis of the pre-set condition, when GSM signals get back,
all the event alerts will be auto-sent to the authorized numbers or monitoring
platform (server), but the logged tracking data should be loaded to the
monitoring platform via SMS command.
6.16.2.
Logging upon times: Send SMS: “save0password” to the tracker
unit, it will reply “save ok”, and will log the lat, long locations every 30
seconds for 5 times. (S: second, m: minute; h: hour).
6.16.3.
Multi-logging
：
Send SMS:”save030s***n+password” to tracker device, it will
reply “save ok”.
6.16.4.
Cancel logging: Send SMS “password”, e.g. nosave123456
6.16.5.
Logging Clearance: send SMS: “clear+password” to tracker device, it will
reply “clear ok”.
6.16.6.
It depends on the capacity of the SD card inserted in the tracker device.
6.16.7.
The logged data in SD card can be copied to computers, and then the data route can be
checked by importing data in the menu “Data Import” of web platform
www.gpstrackerxy.com
6.17.
Data Load
6.17.1.
Current date Load: Send SMS: “load+ password” to tracker device, it will reply: “load
ok” if the device is working well under GPRS mode; if not, it will reply “load fail! Please