YANGZI YZ-S6, Instruction Manual

Page: 9 / 10

8
InstructionManual
YZ-S6
electric dustshaker doesnot
work
Excessive motor load Check and reduce the load
The switch is broken Replace the fuse
The fuse is burnt out Check and reduce the load
Motor damage Replace the motor
Bearing wear Replace the bearing
The electric dust shaker
does not work
Problems of controller, fuse,
drive motor, governor and
brake switch
Check the input and output
voltage, alarm signal,
indicator light, fuse, drive
motor and connecting
circuit.
The car can't move forward
or backward
Pedal governor damaged Replace the governor
Brake pedal position fault
Reset the brake pedal
and check if it is in good
condition
Brake switch failure Replace the brake switch
Controller damage Replace the brake switch
The battery doesn't charge
Charger does not work
Check the charger input
power
The battery is burnt out Replace the battery
Charger
Check whether there is
output of charger
Loose battery terminals
Check and tighten the
battery terminals
Batterydischargingtoofast
Insufficient charging time Increase charging time
The battery is burnt out Replace the battery
Charger damaged Replace charger