YANGZI YZ-S6, Instruction Manual

Page: 8 / 10

7
YZ-S6
InstructionManual
operation precautions
PROBLEM REASON TREATMENT
Large leaves or large garbage
particlesare leaked during
sweeping
Working too fast Reduce the working speed
Brush height Adjust brush height
The bristles are deformed or
entangledwith filaments Remove the entanglement
Thesweeperleavesduston
the floor or dust from the
side shields
Filter clogged Clean the filter
Skin damage
Checkthebaffleandreplace
it ifdamaged
Cleaning is not thorough,
leaving paper scraps, leaves
or other garbage
Theliftingheightoffront
bumper is notcorrect
Checkthebaffleandreplace
it ifdamaged
The brush is pressed too low Adjust brush height
The brush wears too fast
Thebristlesareentangled
with filaments
Remove the entanglement
Too much noise at work
The bearing is broken Replace the bearing
Brush overpressure Reduce brush pressure
The brush does not rotate
when it works
The drive belt is damaged Replace the belt
Brush and fan motor do not
work
Motor damage Replace the motor