6
end of the pole arrive to the flange set. According to the screw hole on flange set, drill
3 holes of 12 mm diameter on the pole with drilling machine. Fasten with three pieces
of socket screws (M10x50mm) and tighten with nuts. (Flange set is closely marched
with tower, which requires punching after installation by customers, so the tower we
provide has no punching)
2. Connection between flange and tower
Connect cable
respectively
with
three
lines
at
the
bottom
of the
head, then
pierce cable from the center of tower and short-circuit three cables of wind generator;
Summary of Contents for 2205
Page 1: ...1 600W USER S MANUAL ...
