Yamorc YD7403, Quick Star, Page: 6 / 13

P 6
www.yamorc.de
YD7403
Hardware Overview
6 Blue LED — Off if no signal is detected via Loconet®.
**** Flashes
when a signal is detected via Loconet® but Loconet®
is not selected as the ac ve signal source.
* Lights up con nuously when a signal is detected via
Loconet® and Loconet® is selected as the signal source.
7 Loconet® B
Connec on 2 A Loconet® connec on cable can be used to establish a connec on
to the control centre via Loconet® B.
8 ES-PGM
Link YaMoRC programming adapter connec on
Firmware updates and advanced programming can be carried out
with the YaMoRC programming adapter.
9 B-Bus®
Connec on 1 A B-Bus® connec on cable can be used to establish a connec on to
the centre can be established via the B-Bus®.
10 Blue LED — Off
if no signal is detected via the B-Bus®.
**** Flashes when a signal is detected via the B-Bus® but the B-
Bus® is not selected as the ac ve signal source.
* Lights up con nuously when a signal is detected via the B-
Bus® and the B-Bus® is selected as the signal source.
11 B-Bus®
Connec on 2
A B-Bus® connec on cable can be used to establish a connec on to
the centre can be established via the B-Bus®.
12 Status Anzeige
Green LED
Red LED
* Green LED lights up con nuously Track Out ac vated.
**** Green LED flashes EMERGENCY STOP recognised by the
control centre.
**** Red Led flashes. Short circuit detected at the Track Out
* — * Green
and
Red LEDs
flash alternately. No valid input signal
input signal detected via Loconet®, B-Bus®, CDE or Track
Snifer.
1 E C D
DCC Booster CDE booster connec on to the control centre (note connec on designa -
on)
2 Blue LED — Off
if no signal is detected via CDE or track sniffer.
*_*_ Flashes when a signal is detected via CDE or Track Sniffer, but CDE
or Track Sniffer is not selected as the ac ve signal source.
* Lights up con nuously when a signal is detected via CDE or Track
Sniffer is detected and CDE or Track Sniffer is selected as the signal
source.
3 Track
Sniffer
Input Any DCC digital signal can be connected to this connec on if no other
connec on op on (CDE, Loconet® B, B-Bus®) to the control centre is pos-
sible.
4 Track Out Connec on to the track
5 Loconet® B
Connec on 1 A Loconet® connec on cable can be used to establish a connec on to the
control centre via Loconet® B.
9 10 11
12
8 7 6 4 3 2 1 5
13 14 15 16