P 3
www.yamorc.de
YD7403
Descrip on
The
YD7403
is a DCC booster with a maximum output power of 3.5A. Railcom® is also supported.
A en on! The digital formats mfx®, Motorola and similar are not supported! The YD7403 is a pure DCC booster.
The
YD7403
is configured "out of the box" so that the signal source (Loconet®, B-Bus®, CDE connec on, track sniffer) is selected automa cally.
The "
ES-PGM Link
" connec on allows the booster to be fully configured. This requires a YD9100 configura on module, for example.
The
YD7403
can be switched on or off via a DCC accessory address (turnout address).
A
polarity change
of the track out can be carried out via a DCC accessory address (turnout address).
Attention! This function does not replace a complete reverse loop module.
The
YD7403
can report its current status to the control center via Loconet®.
Various actions (global emergency stop, local emergency stop, global power on/off, local power on/off) can be assigned to the
multifunction button
on the YD7403 can be assigned.