31
7 Press
to store the setting value.
To finish the pre-setting, keep pressing
.
The scale turns off.
SETUP
Set the lower limit of each rank and the upper limit of the upper rank. When sorting items to 2 ranks,
it is necessary to input the 3 set-points.
Note) The registered data of each item are stored even if the scale is turned off.
e.g.) Sort the Item No. 21 to 2 ranks. Rank 1=100g to 200g, Rank 2= 200g to 300g
Operation
Display
1
Press
to turn on the scale.
2
Confirm the pan is empty, and then press
briefly.
The display switches to the rank setting screen.
RANK
blinks.
3
Press
or
to chose the item number
e.g.) Item No. = 21
4
Press
. The display goes to the setting screen of rank 1.
Set the lower limit of rank 1.
Pressing
changes the digit.
Pressing
or
changes the value.
5
e.g.) When set the rank 1 at 100g to 200g, set the lower
limit at 100.
6
Press
.
The display goes to the setting screen of rank 2.
The two portions of bar chart lights when setting the lower
limit of rank 2.
Note) If you set the lower limit of rank 2 at 100 or lower value,
error buzzer sounds and cannot go to the next setting.
