10
Place the scale
Make sure that the scale is placed on a leveled surface, or a correct measurement cannot be
attained.
Make sure that the scale is not shaky, which also results in an incorrect measurement.
Do not place the scale on an inclined surface (if the inclination is beyond the adjustable range by the
leveler).
The bottom of the scale is equipped with 4 leveling legs with which the scale is adjusted to be on the
level. Turn the leveling legs until the bubble locates at the center of the benchmark circle. It is
recommended that the adjustment is conducted on a flat surface. Make sure that all the 4 legs
equally touch the floor.
How to interpret bubble position
The length of the leg is adjusted by
turning the leveling leg.
The location of the bubble shows the
horizontal status of the scale.
