20
Operational Precautions
Certain areas become very hot
During and following operation, the areas around
the lid become very hot. Be careful not to touch
these areas.
◆
Gray areas in the illustration on the right
become especially hot.
Lid gasket
Any damage or dust on the lid gasket/flange of the
chamber (gray area in illustration on right) will allow
steam to escape. Be sure to keep this area clean and
avoid contacting with baskets, etc. when installing or
removing materials from the chamber.
The gasket may deteriorate according to use. If steam escapes frequently, you may need to
change the gasket.
Panel guard
The panel guard was designed to protect the
display/keypad. Do not hold the panel guard to
move the sterilizer.
“ENTER” key
The “ENTER” key will interrupt the program operation.
