Yamato Pure Line WL220T Instruction Manual Download Page 44

Page: 44 / 44

Limited liability

Be sure to use the unit strictly following the handling and operating instructions in this

operating instruction.

Yamato Scientific Co., Ltd. assumes no responsibility for an accident or a malfunction

caused by use of this product in any way not specified in this operating instruction.

Never attempt to perform matters prohibited in this operation instruction.

Otherwise, an unexpected accident may result.

Notice

●

Descriptions in this operating instruction are subject to change without notice.

●

We will replace a manual with a missing page or paging disorder.

Instruction Manual

Water Purifier

Pure Line

○

WL220T

Second Edition January 20, 2017

Yamato Scientific America, Inc.

925 Walsh Avenue, Santa Clara,

CA 95050, U.S.A

http://www.yamato-usa.com

Toll Free: 1-800-2-YAMATO(1-800-292-6286)

Summary of Contents for Pure Line WL220T













































Search results

Summary of Contents for Pure Line WL220T

Reviews:

Related manuals for Pure Line WL220T

Brands by name

Popular brands

Yamato Pure Line WL220T, Instruction Manual

Search results

Summary of Contents for Pure Line WL220T

Reviews:

Related manuals for Pure Line WL220T

Brands by name

Popular brands