15
How to register the entries
The DP-5601 can individually or collectively save the tare weight, code number in each call number.
The call numbers No.1 to 100 are available, and 100 sets of data can be stored in total.
Since these data are saved in the internal memory, they cannot be lost even if the instrument is powered
OFF.
The registration of frequently used data simplifies the settings before work, and further improves working
efficiency.
1. How to register the entries collectively
(Method of registering the setting data all at once)
<<Example>> To register the following settings in the call number 70:
Tare weight: 1.50 kg, Code number: 123456
Operating procedure
Panel display
Remarks
c
Enter and set all the data in
advance.
Only the preset data can be
registered.
If there are any measured
objects on the platform of
the instrument after data
setting, remove them from
the platform.
d
Press and hold the
key.
(The blinking field is used for
setting a value.)
This key works only when
GROSS is zero (i.e. there
is nothing on the weighing
unit).
e
Press the
key.
(The blinking field is used for
setting a value.)
Pressing the
key once
again returns to individual
registration (tare weight).
f
[Entering a call number]
Enter
and
in that
order.
(The blinking field is used for
setting a value.)
To cancel the registration,
press the
key. After
confirming that the call
number is shown as “000,”
proceed to Step
g
.
The system sounds an
alarm buzzer and cancels
the registration.
g
Press the
key.
The display returns to indication in
Step
c
(weighing display).
