8
How to carry out measurement
Operating procedure
Panel display
Remarks
c
[Turning ON the display]
Press the
key.
All lamps come on and “0.00”
appears. The
T
signs above “
→
0
←
,”
and “STABLE” come on.
e.g.) Capacity: 30kg, Division: 0.01kg
All lamps continuously come on
until the instrument becomes
stable.
If the error code
or
appears after all lamps
come on, refer to page 34.
If the optional printer
JPS-508 is connected and
the error code
appears during use, press
the
key and then
key. If the same code
appears, consult with
Yamato Scale’s dealer.
d
[Start measurement]
Place an object to be weighed
on the platform of the
instrument.
The weight of the object appears.
(The following indication shows that
the object weighs 10.00 kg.)
If the error code
appears after an object is
placed on the instrument,
the weight of the object
exceeds the measurable
range of the instrument.
Remove the object from the
instrument, and use the
instrument within its rated
operating range.
How to power OFF
Operating procedure
Panel display
Remarks
c
[Turning OFF the display]
Press the
key.
This instrument consumes
standby power even with
the display turned OFF. If
the instrument is to be
unused for a long time,
unplug the power cable.
How to rezero
Operating procedure
Panel display
Remarks
c
Press the
key.
*This resets to zero and
displays “0.00.”
The effective range of
zero reset is within
±
1.9% of the weighing
capacity.