![background image](http://html.mh-extra.com/html/yamato/dkn302c/dkn302c_instruction-manual_905253028.webp)
25
4. OPERATION PROCEDURES
Auto Start Mode
To terminate auto start operation
Operation begins automatically when timer reaches 0.00; but
must be stopped manually. Auto start mode can be cancelled
any time before or during operation by pressing the RUN/STOP
key for about one second. Displays revert to initial settings
screen.
Editing or confirming
settings
Changing temperature settings or timer settings before an
operation begins may be done by pressing the TIMER key.
Use the
▼▲ keys to change setting values. Press the ENTER
key when changes have been entered as desired.
These values cannot be modified once operation begins. This
can only be done by pressing the RUN/STOP key to terminate
operation and setting the values over again.
NOTE:
Press the
▼ key at any time after settings are made to
see temperature setting, operation mode and remaining time
until start, in the center display.
Summary of Contents for DKN302C
Page 2: ......