YCO-1102-05-02
CPS Series
Operation Manual
The scale can check various functions automatically. When a problem is detected, the following mes-
sages will be displayed. If you take the steps described below but the problem is not fixed, the scale
needs to be serviced by a qualified scale technician.
Low battery indication. Replace both batteries with new
ones. If the indication does not charge, see a qualified scale
technician.
Overload condition. Remove weight that is greater than the
scale capacity from the platform. If no weight is on the
platform, calibration or service is required.
Power on counts are too high. Remove weight from the
platform, turn the scale off and back on. If the error remains,
calibration or service is required.
Underload condition. Generally indicates that something is
wedged between the platform and scale body. Remove the
obstruction. If there is no obstruction, calibration or service is
required.
Power on counts are too low. This generally indicates that
the platform is not on the scale or that something is wedged
between the platform and the scale body. Replace the scale
platform, remove any obstructions under the platform, turn
the scale off and back on. If the error remains, calibration or
service is required.
EEPROM read/write error. Service is required.
V Troubleshooting and Error Messages
6
