![background image](http://html1.mh-extra.com/html/yamato/bt43/bt43_instruction-manual_3130734016.webp)
13
AZ-SD, AZF-G/BT43
3.4 Adjustment at end of sewing
Fig. 3-6
Fig. 3-7
Fig. 3-8
lighted
3.4.2 Stitch plate tongue adjustment at end of sewing
3.4.1 Tension releaser adjustment at end of sewing
(1) Press the “MODE”
key several times to light
the
“END”
lamp only.
(2) Adjust the count by pressing the “▲”
and
“▼” keys so that the tension releaser changes
the thread chain seam condition to the plain
sewing seam condition when the sensor detects
the material end and the material reaches
the needle holes. (Two counts indicate one
stitch.)
(1) Press the “MODE”
key several times to light
the
“END”
and
“TONGUE”
lamps.
(2) Adjust the count by pressing the “▲”
and
“▼”
keys so that the stitch plate tongue is
recessed when the sensor detects the mate-
rial end and the material reaches the needle
holes. (Two counts indicate one stitch.)
lighted
tongue is retracted
3.Proper operation