![background image](http://html1.mh-extra.com/html/yamato/bt43/bt43_instruction-manual_3130734020.webp)
17
AZ-SD, AZF-G/BT43
4.3 Lower looper adjustment
Fig. 4-3
④
③
⑤
②
①
4.4 Stitch plate tongue front-and-rear position
◇ Front position
(1) Loosen the screws ① and turn the solenoid
cover ② in the arrow direction.(See Fig.
4-3)
(2) When the stitch plate tongue is out, loosen
the screw ⑥ and move the stitch plate tongue
arm ⑦ .
(3) When the tongue is out from the stitch plate
by 6 mm, tighten the screw ⑥ securely.
Fig. 4-4
Fig. 4-5
⑧
apply
②
⑦
⑥
6 mm
To adjust the lower looper of a sewing machine
with a BT43 device, take the following steps.
(1) Loosen the screws ① and turn the solenoid
cover ② in the arrow direction.
(2) Loosen the screws ③ and remove the solenoid.
(3) Adjust the lower looper.
(4)
Insert the pin screw ④ into the hole of the
stitch plate tongue ⑤ and reinstall the solenoid.
(5) Tighten the screws ③ securely.
(6) Tighten the screws ① securely.
◇ Rear position
(1) When the tongue is retracted, loosen the
screw ⑧ .
(2)
Apply the rubber cushion of the arm ⑦ to
the solenoid cover ② so that the tongue can
be hidden under the stitch plate completely,
and tighten the screw ⑧ .
stitch plate tongue is hidden
under stitch plate.
4.Adjustments
Always adjust the rear position of the stitch
plate tongue.
ÃÁÕÔÉÏÎ
Before adjusting, ALWAYS turn the motor switch OFF
and check that the motor has already stopped.
ÃÁÕÔÉÏÎ