9
2. PRE-OPERATION PROCEDURES
Prior Confirmation
BM500/510 water bath operation precautions:
Exercise caution in regard to the following.
①
Connect unit to a power outlet having sufficient capacity.
②
Do not move unit while in operation.
③
Avoid touching hot surface areas or bath fluid during operation.
④
Do not drain unit until water temperature falls below 45°C.
⑤
Be sure not to spill water on or around unit while adding. Electric shock or fire may result.
⑥
Do not leave unit unattended during operation.
⑦
Use water for bath fluid. Using purified or distilled water is recommended to prevent buildup of
mineral deposits.
⑧
Do not place or operate unit outdoors.
⑨
Turn power OFF when removing bath container from the main unit.
⑩
Do not heat bath container without water.
BO400/410 oil bath operation precautions:
Exercise caution in regard to the following.
①
Connect unit to a power outlet having sufficient capacity. BO400:100 to 120V AC, 12.5A. BO410:
200 to 240V AC, 6.5A.
②
Do not move unit while in operation.
③
Avoid touching hot surface areas or bath fluid during operation.
④
Do not drain unit until oil temperature falls below 45°C.
⑤
Be sure not to spill oil on or around unit while adding. Electric shock or fire may result.
⑥
Do not leave unit unattended during operation.
⑦
Use ONLY silicon oil for bath fluid.
⑧
Do not place or operate unit outdoors.
⑨
Turn power OFF when removing bath container from the main unit.
⑩
Do not heat bath container without oil.
⑪
Be careful not to allow oil to overflow while heating.
Summary of Contents for BM500
Page 2: ......
