the Stand (66). Tighten connections until
M8x20 (21), Spring Washers (15) and Flat Washers (16);
Use Bolts M8x25 (14), Spring Washers (15) and Flat Washers (16) to
attach the Motor assembly to
secure.
Figure 8
9. Position each Mixer Blade (27) inside the assembly Drum with the pointed
end facing downward. The shape bend in the Blades should point in the
direction of the Drum rotation;
Fasten tops of Mixer Blades (27) to Upper Drum (25) using Bolts M8x20
(21), Flat washers (3) and Nuts M8 (20);
Fasten pointed ends of Mixer Blade to Lower Drum (22) using Bolts M8x20
(21), Flat washers (3) and Nuts M8 (20).
Figure 9
Bolt(21)
Spring washers(15)
Flat washers(16)
Bolt(14)
Spring washers(15)
Flat washers(16)
Stand(66)
Mixer Blade(27)
Bolts(21)
Flat Washers(3)
Nuts(20)
