When you are completely satisfied with the condition of your shipment,
inventory the contents.
Assembly Instructions
1. To attach Wheels (68) to Wheel Bracket (70), slide a Flat Washer (67),
Wheel and second Flat Washer onto each end of Bracket axle;
Insert a Cotter Pin (69) through holes in each end of the Bracket axle and
bend the Cotter Pins over to secure the Wheels in place.
Figure 1
2. Place the Stand (66) into the Wheel Bracket (70) so that the bolt holes line
up. Fasten together using Bolts M8x65,M8x55(5,4), Flat Washers (3) and
Nuts M8 (6). Tighten with a wrench (not included) until secure;
Insert Leg (1) into Stand so that holes line up. Fasten together using Bolts
M8x65,M8x55(5,4), Flat Washers (3) and Nuts M8(6). Tighten with a
wrench until secure;
Place Stand upright.
Figure 2
Wheel(68)
Cotter Pin(69)
Flat Washer(65)
Wheel Bracket(70)
