3
AB-5963
Specifications
Item
Specifications
Temp.
–20 to 60 °C
Measurement range
Dewpoint
–40 to 60 °C DP (–20 to 60 °C)
Temp.
100
Ω
/ 0 °C
Ouput signal
Dewpoint
1-5 V DC (linear to –40 to 60 °C DP) (output impedance: min. 10 k
Ω
)
0-10 V DC (linear to –40 to 60 °C DP) (output impedance: min. 10 k
Ω
)
4-20 mA DC (linear to –40 to 60 °C DP) (maximum permmisible load 300
Ω
)
Temp.
+/– 0.3 °C (at condtions of –20 to 60 °C)
Sensing accuracy
Dewpoint
+/– 1 °C DP (at condtions of 30 to 90 % RH 25 °C)
+/– 2.5 °C DP (at condtionas of 30 to 90 % RH –5 to 55 °C)
Temp.
Max. 4 min.
Time constant
(at air velocity 2 m/s)
Dewpoint
Max. 1 min. (when humidity is constant)
Temp.
Rated operaing condtions:
–20 to 60 °C
0 to 100 % RH (non-condensing)
Extreme oprating condtions:
–20 to 60 °C
0 to 100 % RH (non-condensing)
Storage condtions:
–30 to 70 °C
5 to 95 % RH (non-condensing)
Humid.
Rated operaing condtions:
–5 to 55 °C
10 to 100 % RH (non-condensing)
Extreme oprating condtions:
–20 to 60 °C
0 to 100 % RH (non-condensing)
Storage condtions:
–30 to 70 °C
5 to 95 % RH (non-condensing)
Environmental conditions
Air velocity Extreme oprating condtions :
0 to 15 m / s
Power supply
24 V AC +10 / –15 % (50/60 Hz), 24 V DC +/– 10 % (only for HTY
、
HYseries)
Power consumption
0.6 VA
(at conditions of 24 V AC, HTY, HY series 1-5 V, 0-10 V output model)
450 mW
(at conditions of 24 V DC, HTY, HY series 1-5 V, 0-10 V output model)
1.4 VA
(at conditions of 24 V AC, HTY, HY series 4-20 mA output model)
1.2 W
(at conditions of 24 V DC, HTY, HY series 4-20 mA output model)
Dielectric strength
500 VAC less than 1 mA of leak for 1 minute
Insulation resistance
500 VDC min. 20 M
Ω
Vibration resistance
9.8 m/s² (10 to 150 Hz)
Protection
Housing IP54 (when splash-proof connectors and disgnated multi-core calbes are used or when a designated
conduit is used)
Insatllation
Duct, air chamber, ventilated case for meteological instruments (with special bracket)
Wiring
Terminal block connection
Material
Housing:
GF20 % Polycarbonate mixed resin, gray (equivalent to DIC-651)
Filter cap:
denatured PPE resin, gray (equivalent to DIC-651)
Weight
Approx. 240 g (7903 series) Approx. 210 g (7913 series)
Accessories
None
Order separatly
83157235-001
Mounting bracket
83157240-004
Conduit mounting set (for HTY, HY series
、
applicable cable outer diameter11 to 14
φ
)
83104098-004
Seal connector (for HTY, HY series
、
applicable cable outer diameter 10.5 to 14.5
φ
)
DY8000A1001
Sensor shield for outdoor
DY3002A1005
ventilated case mounting bracket (L shape metal)
Order separately for
maintenance
83162945-003
Filter set
