YAMAN M22 User Manual Download Page 3

4

3

Safety P

recautions

Safety P

recautions

WARNING

WARNING

• In bathrooms or near bathtubs, showers, washbasins or other containers filled with water
• A dusty location
• Outdoors or a location where there is exposure to direct sunlight
• A slope or a location where there are vibrations or shocks
• A location where there are strong radio waves or magnetism
• Near a flammable substance (such as alcohol, thinner, benzene, nail polish remover or spray).
• A location where there is exposure to oil smoke or steam
• A location that may become hot, such as near a heating device (e.g. a heater)
• A location with drastic temperature changes (e.g. near an air conditioner or heater)

Failure to comply may cause a fire, electric shocks, accidents, malfunction of the device, 
falls or injuries.

Do not use, store or charge the device in the following locations:

Prohibition

Failure to comply may cause the 
electrodes to stick to and damage 
the skin.

Do not use at a temperature 
below the specified ambient 
temperature.

Prohibition

Inquiry the Global After Service 
(https://www.ya-man.co.jp/en/support/
repair/) or your local distributor and 
use the dedicated AC Adapter. Do not 
connect anything other than the rated 
power supply (DC9V 2.0A).

Do not use the device if the AC 
adapter is damaged.

Prohibition

Failure to comply may cause a fire or 
other accidents.

Do not leave the device 
unattended while it is turned on.

Prohibition

Failure to comply may cause an 
electric shock or a fire due to a short 
circuit.
Be sure to turn off the power before 
pulling out the plug.

Do not pull out the plug from a 
power outlet or pull out the plug 
from the device during use.

Prohibition

Failure to comply may cause 
accidents or injuries.

Children should obtain the consent 
of their guardians before using the 
device and should only use it under 
the supervision of a guardian or a 
specialist.

User 

restrictions

Failure to comply may cause 
accidents or injuries.

Keep the device and AC adapter 
away from children and do not 
allow them to use it alone. 
Children shall not play with the 
appliance.

User 

restrictions

Non-intended 

uses are 

prohibited

Failure to comply may cause a 
malfunction of the device or an injury.

Do not use the device for any 
purpose or in areas other than 
those stated in the User’s 
Manual.

The device features a built-in 
rechargeable battery.
Failure to comply may lead to the 
generation of heat, a fire or 
explosion.

Do not dispose of the device in a 
fire or place it near fire or flames. 
Do not use, charge or store in a 
high-temperature or 
high-pressure area.

Combustion 

warning

Failure to comply may cause an 
electric shock, short circuit, fire, or 
malfunction of the device.
Contact your local distributor for 
advice on repairing the device.

Do not use if the AC adapter is 
damaged or if the wall socket is 
too loose.

Use of a 

damaged cable 

or plug is 

prohibited

Failure to comply may cause a fire 
or electric shock.

If the device is dropped or 
damaged, turn off the power 
immediately, pull out the plug, 
and request a repair/inspection.

Must Comply

Failure to comply may cause a fire, 
electric shock or other accidents.
* The free-repair warranty is only 

valid in Japan.

Failure to comply may cause a 
fire, electric shock or other 
accidents.

Must Comply

Failure to comply may cause a fire, 
an electric shock or other injuries.
Contact your local distributor for 
advice on repairing the device.

Do not disassemble, attempt to 
repair or modify this device in 
any way.

Disassembly 

is prohibited

Failure to comply may cause an 
electric shock, short circuit, fire, or 
malfunction of the device.

When disconnecting the plug 
from a power outlet, be sure to 
pull it out by grasping its head 
instead of the cord (do not touch 
the metal parts). Do not insert or 
disconnect the plug with wet or 
damp hands.

Removing 

the plug

Failure to comply may cause a fire 
or electric shock.

If you feel an earthquake, see 
lightning or hear thunder, turn 
off the power and unplug the 
device.

Removing 

the plug

Make sure to disconnect the AC 
adapter from a power outlet after 
charging is completed. Failure to 
comply may cause a fire or other 
accidents.

After using the device, when the 
device is not in use and when 
cleaning it, be sure to turn off the 
power and remove the plug from 
a power outlet.

Removing 

the plug

Failure to comply may cause an 
electric shock, a short circuit or a 
fire.

Always use the dedicated AC 
adapter.

Prohibition

Failure to comply may cause an 
electric shock, short circuit, fire, or 
malfunction of the device.

Do not exceed the rated capacity 
of a power outlet or wiring 
accessory (do not connect too 
many plugs to one outlet).

Overloading of 

an electric circuit 

is prohibited

Failure to comply may cause the 
cable to break, resulting in a fire or 
an electric shock.
Straighten out any twists in the cord 
before storing.

Do not damage, modify, bundle, 
twist or otherwise apply undue 
force to the AC adapter.

Careless or 

reckless use 

is prohibited

Summary of Contents for M22















Reviews: