19
20
After T
reatment
After Treatment
1
Ensure the power is off and unplug the AC adapter from the main unit.
2
To clean the treatment head and cotton stopper, wipe with a damp and
well-wrung cloth to remove any dirt. Wash the cotton stopper with
water.
• Remove the cotton stopper from the main unit and wash it with water before wiping it dry.
• Do not wipe the device with solvents such as alcohol, thinner, benzene, nail polish remover,
kerosene, chemicals or polishing powder.
Failure to comply may cause damage to the surface of the device.
• After using the device, thoroughly wipe off any remaining lotion and gel, ensuring none is left on the
device. Failure to comply may cause a malfunction of the device.
3
Wipe off any dirt from areas other than the electrode head and cotton
stopper with a dry cloth.
How to clean and store the product
Storage
When the device is not in use for a long period of time, turn off the power and disconnect the AC adapter
from the main unit and wall socket before storing.
Avoid storing the device near a heater or in a bathroom or other high-temperature/high-humidity
locations. Also, avoid unstable locations or places where there is exposure to direct sunlight.
Keep the device out of the reach of children.
Cleaning and user maintenance shall not be made by children without supervision.
Maintenance and Inspections
When you have not used the device for a long period of time, check to see that it is functioning normally
before re-starting use. Failure to comply may lead to an accident or malfunction of the device.
If the device is malfunctioning, go to ‘Checklist for Possible Problems’ (pages 21-22) and attempt to identify
the problem before arranging to have the device repaired. If the problem persists, inquiry the Global After
Service (https://www.ya-man.co.jp/en/support/repair/) or your local distributor.
If the device malfunctions, appears damaged or needs service, please contact your local distributor.
* Please carefully clean the parts of the device that come into contact with the skin every time you use it and
keep the device clean at all times.
Failure to comply may cause skin problems.
<COOL Mode>
How to treat the upper eyelids, lower eyelids and outer corners of the eye
using the LED light in NEB, EMS Up or COOL Mode.
Remove the cotton pad, close your eyes and hold the device at least 5 cm away from the skin to use
the LED light.
Power-off
Left side
One beep
Beeping sound
About
90 seconds
About
90 seconds
Right side
Press the electrode head repeatedly on your face
as if stamping on the skin (Press
→
Release
→
Move electrode head).
* The device can also be used over the lower
eyelids and outer corners of the eye.