12
After each use, refer to ‘After Treatment’ and
remove the remaining sebum, skin care product and
other particles stuck to the device.
Failure to comply may cause a malfunction of the
device or skin problems.
Areas you should
not treat
Apply the included skin care product to the center of the
electrode head, then apply the electrode head to the skin and
move it around.
Divide the facial treatment in eight areas (pages 13-14).
Apply one pearl-sized drop of the included skin care product for each area.
3
Care for the skin after treatment
After treatment is complete, rub the remaining skin
care product into the skin and use your usual basic
skin care products to condition the skin.
Included skin care product
(About one pearl-sized drop)
CAUTION
• Do not apply the included skin care product with your hand. Failure to comply may
cause the skin care product to stick on the device or cause it to slip and fall.
• Please reapply skin care products or water during treatment to ensure there is always
some liquid between the electrode head and the skin. If there is an insufficient amount
of skin care product or water, the stimulation will become weaker, causing skin problems.
• If the device does not move smoothly, apply more of the included skin care product.
• Use in a position in which the entire surface of the electrode head comes in a contact
with your skin.
• Be sure to move the device on your skin while it is in use.
• If it feels too hot, move it a little more quickly or lower the level.
• Please carefully clean the parts of the device that come into contact with the skin every
time you use it and keep the device clean at all times. Failure to comply may cause skin
problems.
• If you feel an unpleasant tingling on your skin, reduce the
intensity level or move to another area. You could also moisten
the skin with water, lotion or gel before using the device. Failure
to comply may cause damage to your skin.
• Throat, eyeball, upper and lower eyelids, outer corner of the eye
(except in eye area treatment).
• Do not leave skin care products on the electrode head while the
power is turned on.
CAUTION
See ‘How to move the device’ (pages 13-14) for
information on how to move the device correctly.
4