INSTRUMENT AND CONTROL FUNCTIONS
3-16
3
Passenger seat
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it clockwise.
2. While holding the key in that posi-
tion, lift the front of the passenger
seat and pull it forward.
To install the passenger seat
1. Insert the projection on the rear of
the passenger seat into the seat
holder as shown, and then push
the front of the seat down to lock it
in place.
2. Remove the key.
NOTE:
Make sure that the seats are properly
secured before riding.
EAU33870
Helmet holders
The helmet holders are located on the
bottom of the passenger seat.
To secure a helmet to a helmet hold-
er
1. Remove the passenger seat. (See
page 3-15.)
2. Attach the helmet to a helmet hold-
er, and then securely install the
passenger seat.
WARNING
EWA11040
Never ride with a helmet attached to
a helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
1. Projection
2. Seat holder
1. Passenger seat lock
2. Unlock.
1. Projection
2. Seat holder
1. Helmet holder
U4B110E0.book Page 16 Friday, October 14, 2005 10:55 AM
Summary of Contents for YZFR1LEC
Page 1: ...4B1 28199 10 YZFR1LEV C OWNER S MANUAL LIT 11626 19 75 ...
Page 2: ...EAU10041 U4B110E0 book Page 1 Friday October 14 2005 10 55 AM ...
Page 111: ...CONSUMER INFORMATION 9 8 9 U4B110E0 book Page 8 Friday October 14 2005 10 55 AM ...
Page 116: ...PRINTED IN JAPAN 2005 11 0 5 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...
