PERIODIC MAINTENANCE AND MINOR REPAIR
6-46
6
Engine overheating
WARNING
EWA10400
●
Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be
blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled.
●
After removing the radiator cap retaining bolt, place a thick rag, like a towel, over the radiator cap, and then
slowly rotate the cap counterclockwise to the detent to allow any residual pressure to escape. When the hissing
sound has stopped, press down on the cap while turning it counterclockwise, and then remove the cap.
NOTE:
If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant
as soon as possible.
Wait until the
engine has cooled.
Check the coolant level in the
reservoir and radiator.
The coolant level
is OK.
The coolant level is low.
Check the cooling system
for leakage.
Have a Yamaha dealer check
and repair the cooling system.
Add coolant. (See NOTE.)
Start the engine. If the engine overheats again,
have a
Yamaha dealer check
and repair the cooling system.
There is
leakage.
There is
no leakage.
U4B110E0.book Page 46 Friday, October 14, 2005 10:55 AM
Summary of Contents for YZFR1LEC
Page 1: ...4B1 28199 10 YZFR1LEV C OWNER S MANUAL LIT 11626 19 75 ...
Page 2: ...EAU10041 U4B110E0 book Page 1 Friday October 14 2005 10 55 AM ...
Page 111: ...CONSUMER INFORMATION 9 8 9 U4B110E0 book Page 8 Friday October 14 2005 10 55 AM ...
Page 116: ...PRINTED IN JAPAN 2005 11 0 5 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...