Yamaha YZF155 Owner'S Manual Download

Page: 42 / 98

Instrument an

control functions

5-21

With the engine turned off:
1. Set engine stop switch to “ ” position.
2. Turn main switch to “ ” position.
3. Shift transmission into neutral.
4. Push the start switch.

Does the engine start?

The neutral switch may not be working.

The vehicle should not be ridden

until

checked by a Yamaha dealer.

5. Stop the engine.
6. Set engine stop switch to “ ” position.
7. Shift transmission into gear.
8. Pull the clutch lever.
9. Push the start switch.

Does the engine start?

The clutch switch may not be working.

The vehicle should not be ridden

until

checked by a Yamaha dealer.

YES

The system is OK.

The motorcycle can be ridden.

YES

If a malfunction is found, have the vehicle
inspected before riding.

WARNING

UBNCEYE0.book Page 21 Thursday, September 16, 2021 3:25 PM

Summary of Contents for YZF155



































































































Search results

Summary of Contents for YZF155

Reviews:

Related manuals for YZF155

Brands by name

Popular brands

Yamaha YZF155, Owner'S Manual

Search results

Summary of Contents for YZF155

Reviews:

Related manuals for YZF155

Brands by name

Popular brands