Yamaha YZF155 Owner'S Manual Download

Page: 61 / 98

Perio

ic maintenance an

justment

8-12

EAU20071

Coolant

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.

EAU80890

To check the coolant level

1. Place the vehicle on a level sur-

face.

2. Remove cowling . (See page 8-7.)
3. Hold the vehicle in an upright po-

sition.

TIP



The coolant level must be
checked on a cold engine since
the level varies with engine tem-
perature.



Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.

4. Check the coolant level in the

coolant reservoir.

TIP

The coolant should be between the
minimum and maximum level marks.

5. If the coolant is at or below the

minimum level mark, remove the
coolant reservoir cap.

6. Add coolant to the maximum level

mark, and then install the coolant
reservoir cap.

WARNING! Re-

move only the coolant reservoir
cap. Never attempt to remove
the ra

iator cap when the en-

ine is hot.

[EWA15162]

NOTICE:

coolant is not availa

le, use

is-

tille

water or soft tap water in-

stea

. Do not use har

water or

salt water since it is harmful to
the en

ine. If water has

een

use

instea

of coolant, replace

it with coolant as soon as possi-

le, otherwise the coolin

sys-

tem will not

e protecte

ainst frost an

corrosion. If

water has

een a

to the

1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark

ZAUE4477

1. Coolant reservoir cap

ZAUE4478

UBNCEYE0.book Page 12 Thursday, September 16, 2021 3:25 PM

Summary of Contents for YZF155



































































































Search results

Summary of Contents for YZF155

Reviews:

Related manuals for YZF155

Brands by name

Popular brands

Yamaha YZF155, Owner'S Manual

Search results

Summary of Contents for YZF155

Reviews:

Related manuals for YZF155

Brands by name

Popular brands