Yamaha YZF-R6 99, Service Manual

Page: 338 / 400

8-4
INSTRUMENT FUNCTIONS
ELEC
NOTE:
When the fuel level indicator light comes on the
odometer display will automatically change to
the fuel reserve trip meter mode “TRIP F” and
start counting the distance traveled from that
point. Push the “SELECT” button to change be-
tween the fuel odometer, trip odometer and
odometer modes in the following order:
“TRIP F”
“TRIP 1” “TRIP 2” “ODO”
“TRIP F”
To reset a trip odometer to 0.0, select it by push-
ing the “SELECT” button and push the “RESET”
button for at least one second. To reset the fuel
reserve trip meter, select it by pushing the “SE-
LECT” button and push the “RESET” button for
at least one second.
The display will return to “TRIP 1”. If you do not
reset the fuel reserve trip meter manually, it will
automatically reset and return to “TRIP 1” after
refueling and the motorcycle has traveled both
5 km and for approximately 3 minutes.
Clock
To change the display to the clock mode, push
both the “SELECT” and “RESET” buttons.
To set the clock:
1. Push both the “SELECT” and “RESET” but-
tons for at least two seconds.
2. When the hour digits start flashing, push the
“RESET” button to set the hours.
3. Push the “SELECT” button to change the
minutes.
4. When the minute digits start flashing, push
the “RESET” button to set the minutes.
5. Push the “SELECT” button to start the clock.
After setting the clock, be sure to push the “SE-
LECT” button before turning the main switch to
“OFF”, otherwise the clock will not be set.