Instrument and control functions
4-11
1
2
3
4
5
6
7
8
9
10
11
12
2. Use the mode switch up button or
down button to change the select-
ed item value (vertical scrolling is
not possible).
TIP
Under certain conditions, such as
when the vehicle is in motion, the
throttle grip is turned, excessive
wheel slip is detected, etc., certain
YRC items cannot be adjusted.
When a YRC item is highlighted
but cannot be adjusted, the YRC
item box will return to black.
To turn off the traction control system
select TCS with the center button, then
push and hold the up button until TCS
OFF is displayed. To turn TCS back on,
select TCS OFF and then press the
down button (TCS will return to its pre-
vious setting).
TIP
Turning off the traction control system
will turn off the SCS, LCS, and LIF sys-
tems for all YRC modes.
YRC items LCS/QS/LIF
The on/off status of YRC items LCS,
QSS, and LIF is shown here. When any
of these systems are registered (not set
to OFF) for the currently selected YRC
mode, its respective icon will appear.
When LCS is registered for the current-
ly selected YRC mode, its icon will be
grey. To activate the launch control
system, press and hold the center but-
ton until the LCS icon stops flashing
and turns white.
TIP
LCS, QSS, and LIF system setting lev-
els can only be adjusted from the
MENU screen.
Clock
The clock uses a 12-hour time system.
Lap timer
This stopwatch function measures and
records up to forty laps. On the main
screen, the lap timer shows the current
lap time and lap number (indicated by
the LAP mark). Use the Pass/LAP
switch to mark lap times. When a lap is
completed, the lap timer will show the
latest lap time (marked by the LATEST
indicator) for five seconds.
1. Mode switch “MODE”
2. Up button
3. Center button
4. Down button
1
2
4
3
QS
LIF
N
12
GPS
12 34
LAP
01
ODO
km
123456
MODE-
A
LCS QS
LIF
LATEST
×
1000 r/min
12:00
km/h
123
PWR
1
TCS
2
SCS
3
T -1
km/h
123
GEAR
MODE-
A
MODE-
A
BX4-9-E2.book 11 ページ ２０１８年９月６日 木曜日 午後４時３９分
