Yamaha YZF-R1 2019 Owner'S Manual Download Page 114

Page: 114 / 124

Motorcycle care and storage

8-5

the tires from becoming degraded
in one spot.

9. Cover the muffler outlet with a

plastic bag to prevent moisture
from entering it.

10. Remove the battery and fully

charge it, or attach a maintenance
charger to keep the battery opti-
mally charged.

NOTICE:

Confirm

that the battery and its charger
are compatible. Do not charge a
VRLA battery with a convention-
al charger.

[ECA26330]

TIP



If the battery will be removed,
charge it once a month and store it
in a temperate location between
0-30



C (32-90



F).



See page 7-32 for more informa-
tion on charging and storing the
battery.

BX4-9-E2.book 5 ページ２０１８年９月６日　木曜日　午後４時３９分

Summary of Contents for YZF-R1 2019





























































































































Search results

Summary of Contents for YZF-R1 2019

Reviews:

Related manuals for YZF-R1 2019

Brands by name

Popular brands

Yamaha YZF-R1 2019, Owner'S Manual

Search results

Summary of Contents for YZF-R1 2019

Reviews:

Related manuals for YZF-R1 2019

Brands by name

Popular brands