Yamaha YZF-R1 2019 Owner'S Manual Download Page 115

Page: 115 / 124

9-1

Specifications

EAU84922

Dimensions:

Overall length:

2055 mm (80.9 in)

Overall width:

690 mm (27.2 in)

Overall height:

1150 mm (45.3 in)

Seat height:

855 mm (33.7 in)

Wheelbase:

1405 mm (55.3 in)

Ground clearance:

130 mm (5.12 in)

Minimum turning radius:

3.3 m (10.83 ft)

Weight:

Curb weight:

200 kg (441 lb)

Engine:

Combustion cycle:

4-stroke

Cooling system:

Liquid cooled

Valve train:

DOHC

Cylinder arrangement:

Inline

Number of cylinders:

4-cylinder

Displacement:

998 cm

Bore × stroke:

79.0 × 50.9 mm (3.11 × 2.00 in)

Starting system:

Electric starter

Engine oil:

Recommended brand:

Type:

Full synthetic

SAE viscosity grades:

10W-40, 15W-50

Recommended engine oil grade:

API service SG type or higher, JASO stan-
dard MA

Engine oil quantity:

Oil change:

3.90 L (4.12 US qt, 3.43 Imp.qt)

With oil filter removal:

4.10 L (4.33 US qt, 3.61 Imp.qt)

Coolant quantity:

Coolant reservoir (up to the maximum level
mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

Radiator (including all routes):

2.25 L (2.38 US qt, 1.98 Imp.qt)

Fuel:

Recommended fuel:

Premium unleaded gasoline (Gasohol
[E10] acceptable)

Fuel tank capacity:

17 L (4.5 US gal, 3.7 Imp.gal)

Fuel reserve amount:

3.0 L (0.79 US gal, 0.66 Imp.gal)

Fuel injection:

Throttle body:

ID mark:

2CR4 10

Drivetrain:

Gear ratio:

1st:

2.600 (39/15)

2nd:

2.176 (37/17)

3rd:

1.842 (35/19)

4th:

1.579 (30/19)

5th:

1.381 (29/21)

6th:

1.250 (30/24)

Front tire:

Type:

Tubeless

Size:

120/70ZR17M/C (58W)

Manufacturer/model:

BRIDGESTONE/BATTLAX RACING
STREET RS10F

Rear tire:

Type:

Tubeless

Size:

190/55ZR17M/C (75W)

Manufacturer/model:

BRIDGESTONE/BATTLAX RACING
STREET RS10R

BX4-9-E2.book 1 ページ２０１８年９月６日　木曜日　午後４時３９分

Summary of Contents for YZF-R1 2019





























































































































Search results

Summary of Contents for YZF-R1 2019

Reviews:

Related manuals for YZF-R1 2019

Brands by name

Popular brands

Yamaha YZF-R1 2019, Owner'S Manual

Search results

Summary of Contents for YZF-R1 2019

Reviews:

Related manuals for YZF-R1 2019

Brands by name

Popular brands