Perio
d
ic maintenance an
d
a
d
justment
7-29
7
To install the front wheel
1. Lift the wheel up between the fork
legs.
TIP
Make sure that there is enough space
between the brake pads before install-
ing the wheel.
2. Insert the wheel axle from the right
side.
3. Lower the front wheel so that it is
on the ground, install the remov-
able sidestand, and then rest the
motorcycle on it.
4. Install the washer and axle nut,
and then tighten the axle nut to the
specified torque.
EAU25081
Rear wheel
EAU56743
To remove the rear wheel
WARNING
EWA10822
To avoi
d
injury, securely support the
vehicle so there is no
d
an
g
er of it
fallin
g
over.
1. Loosen the axle nut.
2. Lift the rear wheel off the ground.
3. Loosen the locknut, and then
loosen the drive chain slack ad-
justing bolt on each side of the
swingarm.
4. Remove the axle nut and washer.
5. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.
1. Wheel axle
Ti
g
htenin
g
torque:
Axle nut:
70 N·m (7.0 kgf·m, 51 lb·ft)
1. Axle nut
2. Washer
3. Locknut
4. Drive chain slack adjusting bolt
U1SN85E0.book Page 29 Friday, June 10, 2016 1:20 PM