Instrument an
d
control functions
4-9
4
Compression
d
ampin
g
force
1. Remove the rubber cap by pulling
it out of the front fork leg.
2. To increase the compression
damping force and thereby hard-
en the compression damping, turn
the adjusting screw on each fork
leg in direction (a). To decrease
the compression damping force
and thereby soften the compres-
sion damping, turn the adjusting
screw on each fork leg in direction
(b).
3. Install the rubber cap.
TIP
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above
specifications due to small differences
in production, the actual number of
clicks always represents the entire ad-
justing range. To obtain a precise ad-
justment, it would be advisable to
check the number of clicks of each
damping force adjusting mechanism
and to modify the specifications as
necessary.
Re
b
oun
d
d
ampin
g
settin
g
:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
7 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully
turned in direction (a)
1. Rubber cap
2. Compression damping force adjusting
screw
Compression
d
ampin
g
settin
g
:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
YZ85/YZ85H: 10 click(s) in direc-
tion (b)*
YZ85LW/YZ85LWH: 9 click(s) in
direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully
turned in direction (a)
U1SN85E0.book Page 9 Friday, June 10, 2016 1:20 PM
