Instrument an
d
control functions
4-8
4
EAU13651
Kickstarter
To start the engine, fold out the kick-
starter lever, move it down lightly with
your foot until the gears engage, and
then push it down smoothly but force-
fully. This model is equipped with a pri-
mary kickstarter, allowing the engine to
be started in any gear if the clutch is
disengaged. However, shifting the
transmission into the neutral position
before starting is recommended.
EAU84041
Seat
To remove the seat
1. Pull up the rear of the seat and re-
move the bolt.
2. Pull the seat upwards and rear-
ward to remove it.
To install the seat
1. Fit the slot on the front of the seat
onto the projection on the fuel
tank while inserting the projection
on the middle of the seat into the
seat holder.
1. Kickstarter lever
1
1. Bolt
1
UBR814E0.book Page 8 Monday, March 7, 2022 11:16 AM
