Yamaha YZ65P Owner'S Manual Download Page 54

Page: 54 / 86

Perio

ic maintenance an

justment

7-13

EAU48434

justin

the throttle

rip free

play

Measure the throttle grip free play as
shown.

Periodically check the throttle grip free
play and, if necessary, adjust it as fol-
lows.

TIP

The engine idling speed must be cor-
rectly adjusted before checking and
adjusting the throttle grip free play.

1. Slide the rubber cover back.
2. Loosen the locknut.
3. To increase the throttle grip free

play, turn the adjusting nut in di-
rection (a). To decrease the throt-
tle grip free play, turn the adjusting
nut in direction (b).

4. Tighten the locknut and then slide

the rubber cover to its original po-
sition.

1. Throttle grip free play

Throttle

rip free play:

3.0–6.0 mm (0.12–0.24 in)

1. Locknut
2. Throttle grip free play adjusting nut
3. Rubber cover

(a)

(b)

UBR814E0.book Page 13 Monday, March 7, 2022 11:16 AM

Summary of Contents for YZ65P























































































Search results

Summary of Contents for YZ65P

Reviews:

Related manuals for YZ65P

Brands by name

Popular brands

Yamaha YZ65P, Owner'S Manual

Search results

Summary of Contents for YZ65P

Reviews:

Related manuals for YZ65P

Brands by name

Popular brands