3-30
REAR SHOCK ABSORBER SPRING PRELOAD
ADJUSTMENT
INSP
ADJ
EC36M014
REAR SHOCK ABSORBER SPRING
PRELOAD ADJUSTMENT
1. Elevate the rear wheel by placing the suit-
able stand under the engine.
2. Remove:
9
Rear frame
3. Loosen:
9
Locknut
1
4. Adjust:
9
Spring preload
By turning the adjuster
2
.
NOTE:
9
Be sure to remove all dirt and mud from around
the
locknut
and
adjuster
before
adjustment.
9
The length of the spring (installed) changes 1.5
mm (0.06 in) per turn of the adjuster.
c
C
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
5. Tighten:
9
Locknut
6. Install:
9
Rear frame (upper)
9
Rear frame (lower)
Stiffer
→
Increase the spring preload.
(Turn the adjuster
2
in.)
Softer
→
Decrease the spring pre-
load. (Turn the adjuster
2
out.)
Extent of adjustment
240.5~258.5 mm
(9.47~10.18 in)
Spring length (installed)
a
:
Standard length
251 mm (9.88 in)
*253 mm (9.96 in)
32 Nm (3.2 m•kg, 23 ft•lb)
29 Nm (2.9 m•kg, 21 ft•lb)
1P8-28199-10 80
04.5.12, 7:41:47 PM