5-38
CHAS
FRONT FORK
26. Install:
9
Push rod
1
9
Copper washer
2
9
Adjuster
3
To damper assembly
4
.
NOTE:
9
While compressing the inner tube
5
, set the
cap bolt ring wrench
7
between the inner tube
and locknut
6
.
9
Fully finger tighten the adjuster onto the
damper assembly.
27. Inspect:
9
Gap
a
between adjuster
1
and locknut
2
.
Out of specification
→
Retighten and read-
just the locknut.
NOTE:
If the adjuster is installed out of specification,
proper damping force cannot be obtained.
28. Tighten:
9
Adjuster (locknut)
1
NOTE:
Hold the locknut
2
and tighten the adjuster with
specified torque.
29. Install:
9
Adjuster
1
To inner tube.
30. Fill:
9
Front fork oil
1
From outer tube top.
29 Nm (2.9 m•kg, 21 ft•lb)
55 Nm (5.5 m•kg, 40 ft•lb)
Gap
a
between adjuster and locknut
0.5
~1.0mm (0.02~0.04 in)
Recommended oil:
Suspension oil "S1"
Standard oil amount:
245 cm
3
(8.62 Imp oz, 8.28 US oz)
Extent of adjustment:
200
~300 cm
3
(7.04~10.6 Imp oz,
6.76~10.1 US oz)
Cap bolt ring wrench:
YM-01501/90890-01501
1P8-28199-10 204
04.5.12, 7:48:37 PM
