2-3
MAINTENANCE SPECIFICATIONS
MAINTENANCE SPECIFICATIONS
ENGINE
Shock absorber:
Front shock absorber
Coil spring/oil damper
Rear shock absorber
Coil spring/gas, oil damper
Wheel travel:
USA, CDN
EUROPE, AUS, NZ, ZA
Front wheel travel
300 mm (11.8 in)
←
Rear wheel travel
307 mm (12.1 in)
310 mm (12.2 in)
Electrical:
Ignition system
CDI magneto
Item
Standard
Limit
Cylinder head:
Warp limit
----
0.05 mm (0.002
in)
Cylinder:
Bore size
77.00–77.01 mm (3.0315–3.0319 in)
----
Out of round limit
----
0.05 mm (0.002
in)
Camshaft:
Drive method
Chain drive (Left)
----
Camshaft cap inside diameter
22.000–22.021 mm (0.8661–0.8670 in)
----
Camshaft outside diameter
21.959–21.972 mm (0.8645–0.8650 in)
----
Shaft-to-cap clearance
0.028–0.062 mm (0.0011–0.0024 in)
0.08 mm (0.003
in)
Cam dimensions
Intake "A"
30.246–30.346 mm (1.1908–1.1947 in)
30.146 mm
(1.1869 in)
Intake "B"
22.45–22.55 mm (0.8839–0.8878 in)
22.35 mm
(0.8799 in)
Exhaust "A"
30.399–30.499 mm (1.1968–1.2007 in)
30.299 mm
(1.1929 in)
Exhaust "B"
22.45–22.55 mm (0.8839–0.8878 in)
22.35 mm
(0.8799 in)