Yamaha YXZ10YPXG, Owner'S Manual

Page: 145 / 200

8-27
8
6. Install the panel.
To change the transmission oil
1. Park the vehicle on a level surface.
2. Remove panel B (page 8-10).
3. Place an oil pan under the transmission
case to collect the used oil.
4. Remove the transmission oil filler cap,
and then the transmission oil drain bolt
and its gasket to drain the oil from the
transmission case.
5. Install the transmission oil drain bolt and
new gasket, and then tighten the bolt to
the specified torque.
6. Refill with the specified amount of the
recommended oil, and then install the
transmission oil filler cap.
NOTICE
ECB03150

Do not use oils with a diesel specifica-
tion of “CD” or oils of a higher quality
than specified. In addition, do not use
oils labeled “ENERGY CONSERVING II”
or higher.
1. Transmission oil drain bolt
2. Gasket
2
1
Tightening torque:
Transmission oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
Recommended oil:
See page 10-1.
Oil quantity:
1.50 L (1.59 US qt, 1.32 Imp.qt)
U2HC7LE0.book Page 27 Wednesday, October 7, 2015 12:09 PM