Yamaha YXZ10YPXG, Owner'S Manual

Page: 139 / 200

8-21
8
5. Drain the engine oil from the both the oil
tank and the engine.
TIP
Refer to steps 2–9 of the “To change the en-
gine oil” section for the oil draining procedure.
6. Remove the oil filter cartridge with an oil
filter wrench. Make sure that the O-ring is
removed together with the oil filter car-
tridge. If the O-ring remains attached to
the crankcase, oil leakage may occur.
TIP
An oil filter wrench is available from a Yamaha
dealer.
7. Apply a light coat of clean engine oil to
the O-ring of the new oil filter cartridge.
TIP
Make sure that the O-ring is properly seated.
1. Center bottom panel
2. Bolt
2
2
2
2
2
1
1. Oil filter cartridge
2. Oil filter wrench
2
1
U2HC7LE0.book Page 21 Wednesday, October 7, 2015 12:09 PM