Yamaha YPP-100 Light Piano, Owner'S Manual

Page: 26 / 52

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 26
YPP-100
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
YPP-100 extraordinary versatility. The functions are categorized in groups as
follows:
F1 Tuning ...................................................................... 27
F2 Scale ........................................................................ 27
F3 Dual Mode Functions ............................................. 28
F4 Soft Pedal Mode ...................................................... 29
F5 Metronome Volume ................................................ 29
F6 Preset Song Part Cancel Volume .......................... 29
F7 MIDI Functions ........................................................ 30
F8 Backup Functions .................................................. 33
To Select a Function …
............................................................................
Z
Press the [FUNCTION] button so that its indicator lights.
• Functions cannot be selected during demo/preset song playback or when
the user song recorder is in operation.
X
Use the [TEMPO/FUNCTION
t
,
s
] buttons to select the desired
function: F1 through F8.
C
In the case of the Scale (F2), Dual Mode (F3), MIDI (F7), and
Backup (F8) functions, you will have to press the [+/YES] button
once to enter the respective sub-mode after the function has been
selected, and then use the [TEMPO/FUNCTION
t
,
s
] buttons
again to select the desired sub-function.
• The Dual mode must be engaged before the F3 function can be selected.
If the Dual mode is not engaged, “ F3.- ” will appear on the display and the
sub-mode will not be available.
V
Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
• After selecting the function, the current setting will be displayed when the
[–/NO] or [+/YES] button is pressed for the first time.
B
Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
●
Operation Example
(sub-mode)
Press [+/YES]
Use [TEMPO/
FUNCTION
t
,
s
]
Use [–/NO], [+/YES]
Press [–/NO] or [+/YES]
once