background image

24

Yamaha Concert Marimba Features

Thank you for purchasing a YAMAHA concert marimbas.
Exhaustive research by Yamaha technicians and craftsmen focusing 
on tone quality and playability, has led to the design and creation of 
these marimbas, using select, high quality materials, and Yamaha’s 
original FRP Acoustalon. We are convinced that you will enjoy play-
ing your instrument that produces spreading and yet deep sounds as 
well as rich volume to your content.
This manual describes proper use of YAMAHA concert marimbas. 
Please read it thoroughly to ensure that your instrument will give you 
enjoyment for a long time.

1.  High-Quality Tone Bars

  Tone bars are made of rosewood, which delivers an 

ideal marimba tone and timbre, and African padauk, 
which offers a rich sound that is soft and deep. After 
allowing the woods to dry naturally over time, only 
the finest select pieces are selected for use in mak-
ing the tone bars.

  Type F models use Yamaha’s FRP Acoustalon tone 

bars that have a unique semi-hollow design. These 
bars deliver a clear sound that is extremely close to 
the sound produced by high-quality rosewood. It of-
fers excellent projection, and full volume. Compared 
to wood tone bars, Acoustalon is highly weather re-
sistant, being little affected by changes in tempera-
ture and humidity, which can alter the pitch.

2.  Fine Tuning

  Tone bars are tuned by the highly refined ears and 

skills of our technicians and precision strobe tuners 
in an environmentally controlled room in which both 
temperature and humidity are kept constant. Precise 
tuning of the harmonic overtones, which determine 
timbre, results in stable pitch and tone without any 
unevenness. 

3. Easy Assembly/Disassembly

  The instrument is designed to offer easy assembly 

and disassembly to provide convenient storing and 
transport. The YM-460/460F/410D/46/2400/2400R 
utilize folding designs with two-section frames and 
pipes to provide the utmost in compact convenience.

4. Height Adjustment  

 (YM-460/460F/410/410F/2400/2400R)

  Height adjustable models offer smooth height ad-

justment. Locking screws fit into channels on leg 
pipes to eliminate slippage ad looseness.

  The YM-460/460F/2400/2400R offers a 5-step 

height adjustment that goes from 89cm at its low-
est position, to 97cm at its highest. Since the YM-
410/410F is adjustable in 7-steps, from 76cm to 
88cm, it promotes proper playing posture from chil-
dren to adults.

5. Large Casters

  Large 100mm-diameter casters offer smoother 

transport. (YM-46 and 41 utilize 75mm-diameter 
casters).

6. 3-Step Height Adjustment for Resonator 

Pipes

  Resonator height can be adjusted in 3-steps to 

avoid loss of ideal resonance due to temperature 
changes. (The YM-41 only provides 2-step adjust-
ment.)

Summary of Contents for YM-460





















Reviews: