Yamaha YHT-S400, Owner'S Manual

Page: 20 / 31

20
En
USEFUL OPERATION
■
Setup menu list
If the “SP TYPE” is set to the default setting (“BAR”), “SP DISTANCE” will not be displayed.
You can change various settings of this system using
the setup menu.
1
Press
SETUP
to enter the setup menu.
“SW LEVEL” is displayed in the front panel
display.
2
Press the cursor / to select menu
and press (Center).
The current setting is displayed.
3
Press the cursor / to adjust the
value of each menu.
Press and hold the cursor / to change the
setting value faster.
4
Press
SETUP
again to exit the setup
menu.
y
Press RETURN to return to the previous menu.
If you do not operate within 30 seconds after entering the
setup menu, the system automatically exits the setup menu.
Setup menu
Overview
Item Description of function Page
1: SW LEVEL
Adjusting the volume balance during playback
☞
P. 21 2: CENTER LEVEL
3: SUR. LEVEL
4: TONE BASS
Adjusting high/low frequency sound (tone control)
☞
P. 21
5: TONE TREBLE
6: AUDIO DELAY Adjusting the audio delay
☞
P. 21
7: HDMI AUDIO Setting the audio output
☞
P. 21
8: HDMI CONTROL Switching on/off the HDMI control function
☞
P. 21
9: DISPLAY MODE Changing the brightness of the front panel display
☞
P. 22
10: SP TYPE Changing the setting of the speaker type
☞
P. 22
11: SP DISTANCE Setting the distance between the speakers
☞
P. 22
Note
Basic procedure
1, 4
2, 3
Note