8-34
8
EBU24744
Brake light switches
The brake light, which is activated by the brake
pedal and brake lever, should come on just before
braking takes effect.
The brake light switch for the brake pedal can be
adjusted as follows, but the front brake light
switch should be adjusted by a Yamaha dealer.
Turn the rear brake light switch adjusting nut while
holding the brake light switch in place. To make
the brake light come on earlier, turn the adjusting
nut in direction (a). To make the brake light come
on later, turn the adjusting nut in direction (b).
EBU30155
Adjusting the clutch lever free play
Periodically check the clutch lever free play and
adjust if necessary.
1. To increase the clutch lever free play, turn the
clutch lever free play adjusting nut at the
clutch lever in direction (a), and to decrease it,
turn the nut in direction (b).
If the specified free play cannot be obtained,
proceed with the following steps.
1. Rear brake light switch
2. Rear brake light switch adjusting nut
1
2
(a)
(b)
1. Clutch lever free play
2. Clutch lever free play adjusting nut (clutch lever)
Clutch lever free play:
8.0–13.0 mm (0.31–0.51 in)
1
(a)
(b)
2
UBW261E0.book Page 34 Friday, May 26, 2017 9:38 AM
Summary of Contents for YFZ450R 2017
Page 48: ...4 24 4 1 Handlebar 1 UBW261E0 book Page 24 Friday May 26 2017 9 38 AM ...
Page 63: ...7 1 7 EBU21142 RIDING YOUR ATV UBW261E0 book Page 1 Friday May 26 2017 9 38 AM ...
Page 146: ...11 2 11 1 Model label 1 UBW261E0 book Page 2 Friday May 26 2017 9 38 AM ...
Page 149: ...UBW261E0 book Page 3 Friday May 26 2017 9 38 AM ...