Yamaha YFZ 50 Owner'S Manual Download Page 98

Page: 98 / 132

9-21

TIP

A diagnostic tachometer is needed to make this
adjustment.

1. Start the engine and warm it up.

TIP

The engine is warm when it quickly responds to
the throttle.

2. Attach the tachometer to the spark plug lead.
3. Check the engine idling speed and, if neces-

sary, adjust it to specification by turning the
throttle stop screw at the carburetor. To in-
crease the engine idling speed, turn the throt-
tle stop screw in direction (a), and to decrease
it, turn the screw in direction (b).

TIP

If the specified idling speed cannot be obtained as
described above, have a Yamaha dealer make the
adjustment.

1. Throttle stop screw

Engine idling speed:

1600–1800 r/min

(a)

(b)

UBW415E0.book Page 21 Monday, June 7, 2021 1:01 PM

Summary of Contents for YFZ 50





































































































































Search results

Summary of Contents for YFZ 50

Reviews:

Related manuals for YFZ 50

Brands by name

Popular brands

Yamaha YFZ 50, Owner'S Manual

Search results

Summary of Contents for YFZ 50

Reviews:

Related manuals for YFZ 50

Brands by name

Popular brands